punQtum Q210 P Speaker Station

RIE-Q210-P

$3,162

The Q210 P Speaker Station gives you full control in a cost-effective and easy-to-use package. 4 Channel communication and programmable buttons allow muting all mics, making paging announcements or triggering logic outputs.

Equipped with a network switch with four ports. Two are PoE powered to drive up to 4 wired beltpacks each. The Q210 P Speaker Station is your complete, self-contained communication hub.

Price excludes tax

CONTACT US for a demonstration or more information.

CLICK HERE to download the product brochure.

Main Features

4-channel partyline speaker station
Built-in loudspeaker
Microphone and headset connector
Rugged, Ethercon™ connectors
Easy-to-read colour display
Four configurable buttons for PA announcements, talk to all and GPO
An audio replay of missed comms
GPI inputs and outputs
Analogue inputs/outputs (2x 4-wire ports + 2x inputs + 2x outputs)
Built-in PoE switch to power up to 8 beltpacks
2 Public address output
2 Program signal inputs
On- and Offline configuration software (Win/ Mac)

Specifications

General Specifications

Power Source: 50 … 54 VDC
PoE Power: 30W per PoE port
Sampling Rate: 16 kHz
Headset Connector: XLR 4pin male
Connector Ethernet/LAN: 4x RJ-45 EtherCon
Microphone Connector: 1/4“ jack with 7/16“ -20 UNF thread
Built-in Speaker: 5 Watts
Operating Temp: -10° to +50°C
Operation Environment Humidity: 0 to 90% non-condensing

Headphone Output

Output impedance: 27 Ohm
Output level: + 18.5 dBu (max.)
Frequency response: 20Hz to 7kHz (+0/-1dB)
Distortion @ 1kHz: <-73 dB (0.02%)
Dynamic range (20kHz) 95 dB (A-weighted)

Microphone Input

Bias Voltage: 5.4V (typ.)
Full-scale input range: -53 … +4 dBu
Distortion @ 1kHz: < -75 dB (0.02%) @ + 4dBu FS (min. gain), < -68 dB (0.04%) @ -30dBu FS, < -49 dB (0.35%) @ -53dBu FS (max. gain)
Dynamic range: 92 dB (min. gain), 59 dB (max. gain)

Analog Interface Outputs

Input Impedance: < 2 Ohm
Input Level: + 18 dBu (max.)
Frequency Response: 20Hz to 7kHz (+0/-0.25dB)
Distortion @ 1kHz: <-80 dB (0.01%)
Dynamic Range (20kHz): 98 dB (A-weighted)

Analog Interface Inputs

Input Impedance: > 20 kOhm
Input Level: + 18 dBu (max.)
Frequency Response: 20Hz to 7kHz (+0/-0.25dB)
Distortion @ 1kHz: <-80 dB (0.01%)
Dynamic Range (20kHz): 90 dB (A-weighted)

GPI Inputs

Input Connector: D-Sub 9 female
Number of GPI Inputs: 4
Input Type: Optocoupler input with current limiter
Input Voltage: 5 … 50 VDC
Input Current: 5 mA (typ.)

GPI Outputs

Output Connector: D-Sub 9 male
Number of GPI Outputs: 4
Output Type: PhotoMOS Relay
On Resistance: < 3 Ohm
On Current: 200 mA (max.) – resettable PTC fuse 400 mA
Maximum Voltage: 50 VDC / 35 VAC